Die Cutting Machine
Lead Edge Rotary Die Cutting MachineDetailed description This machine is consist of lead edge rotary die cutter machine , double shake waste disposal machine and stacker to make sure the paperboard precision and quality ,save labour . Die-cutting part 1.Die-cutting roller is made of quality steel the thickness is 30mm, balance......
Max over paper（mm）
Min over paper（mm）
Thickness of paper (mm)
This machine is consist of lead edge rotary die cutter machine , double shake waste disposal machine and stacker to make sure the paperboard precision and quality ,save labour .
1.Die-cutting roller is made of quality steel the thickness is 30mm, balance correction, plating chrome .
2.The wallboard is quality casting iron the thickness is 50mm, large-scale machining center made .
3.Soft rubber roller automatic grinding institutions to improve the utilization of rubber, it can be repaired 3-4 times.
4.Linear speed automatic compensation to ensure that each batch of cartons die-size is fully consistent .
5.Quality rubber CUE MATS made in America, easy to install, it can be used 12 billion times.
6.Rubber roller around move laterally 40mm, rubber pads wear uniform.
7.Grinding gears are made of 40Cr ,low noise, long service life.
8.Die roller adopt cylinder automatic separation device to reduce sleeve wear.
Feeding paper part:
1.Adsorption automatic feeding paper , it can finish slotting, cutting corner , creasing, hit hole one time. Precision ±0. 5mm.
2.Feeding paper speed: 10000 pieces/min, die-cutting precision: ±0.75mm.
3.Adopt planet type electric phase adjusting, it adjusts fast when at start and stop machines .
4.Adopt manual adjust former baffle, electric adjust lateral baffle.
5.Guide paper roll have groove rubber surface to prevent the crushed cardboard and increase the accuracy of feeding.
1.Man-machine interface, equipped PLC precision control system .
2.Host adopt frequency conversion variable drive speed motors.
3. Former and back control panel are concise concentration, easy to operate.
4.The machine is controlled by light, electricity and gas control system.
5.The electrical parts adopt famous brand manufacturer products.
Double shake waste disposal machine
1.This part is consist of convey board waste disposal part ,concentrate waste convey waste and walking locking part.
2.Convey board waste disposal part is formed by transmission shaft through import PU round belt cardboard transmission. In the process of transmission through two vibration, and the board on the convey belt so can disposal the waste paperboard .
3.The waste collection and waste convey part equipped with a two-way waste collection and waste export plate to import the waste wool edge into the output belt.
4.Lock of walking, walking is made up of four pulley to achieve the function of the machine and the host open and close to make the operation more convenient. Lock part is consists of pneumatic components and lock cylinder to make it work in fixed connection with the host formation.