Hebei Xinguang Machinery Imp & Exp Co.,Ltd

Single Facer

High Speed Single Facer

SF-320C/360C Fingerless Type Single Facer Specification Machine Introduction 1.Adopt suction hood structure,with strong high pressure blower.Suction with a silencer,air source and electrical control focus on the same operation counter,away from the motor is not less than 1.5m,operating side is......

SF-320C/360C Fingerless Type Single Facer image001.jpg

 

image003(001).jpg image009.jpg


image005(001).jpg image007(001).jpg 


image011(001).jpg


Specification

Design speed

320C:150m/min

360C:200m/min

Economic speed

320C:120m/min

360C:150-180m/min

Working width

1000mm-2200mm

Max working steam pressure:

1.0-1.3Mpa

Steam temperature

160—210 centigrade

Power requirements:

380V, 50Hz

Diameter of corrugated roller

320C:φ320mm

360C:φ360mm

Diameter of Press roller.

320C:φ325mm.

360C:φ365mm

Diameter of preheater roller

320C:φ360mm

360C:φ400mm

Diameter of Glue roller

320C:φ242mm

360C:φ242mm

Diameter of doctor roller

320C:φ125mm

360C:φ125mm


Machine Introduction

1.Adopt suction hood structure,with strong high pressure blower.Suction with a silencer,air source and electrical control focus on the same operation counter,away from the motor is not less than 1.5m,operating side is closed full cover.

2.The base and wallboard use cast iron structure, the thickness of wallboard is 200mm.

3.Adopt steam spray device to adjust the core paper moisture.

4.Frequency conversion motor as main drive,independent gear box connect with three gimbal axis; Gear adopt oil bath lubricating ; Inverter to make stepless speed regulation.

5.The upper and lower corrugated roller is made of 48 CrMo alloy steel, with heat treatment.The surface is well treated by grind and plated chrome,the hardness is above HRC60o.

6.Upper and lower corrugated roller are unit assemblage, the whole corrugated rollers group can be move and quick replacement,to change flute type quickly.

7.Bearing for corrugated rollers and pressure roller adopt high-temperature lubricating grease to keep running smoothly and durably.

8.Corrugated roller, pressure roller and glue roller is adjusted by pneumatic system with high stability.

9.Glue section are unit assemblage, whole section can be moved by track, save maintenance time.

10.The glue roller surface are treated by special mesh embossed and chrome plated.

11.Supply glue automatically and circularly.

12.Glue volume control with electric adjustment;Gap between glue roller and doctor roller is adjusted by electric.and that will be read out by Digital ;Glue width can be controlled by electric.

13.The glue section can operate dependently or independently when the motor stops,preventing the glue deposited。

14.Easy operation control system:touch screen,human-machine interface,Drawing with color display,function selection,fault indication, and parameter settings.



Hot Tags: high speed single facer, China, suppliers, manufacturers, factory, low price, made in China
Related Products